Αναδιπλούμενη Βάση Πινακίδας ValterMoto Ducati PANIGALE 899 / 1199 (12-15)

Completely disassemble the original license plate support, is necessary to remove the seats, the plastic of the rear tail lights and disconnect the wiring of lights and light plate support license (PIC. 1)

 Place in to the plate support kit supplied the two 7.5mm spacers with 2 M5x30mm screws provided as well (Fig. 2).

 Insert the VMC plate support kit in original housing and tighten the original screws in the original 2 threaded holes in the plate support. Fix with M5x30 screws and M5 nuts supplied (PIC. 2).

 > The VMC license plate support to ist appropriate plate using the screw 4x10mm. supplied for degrees of tilt. > Supports arrows modulating the height of fixing with 4 countersunk screws 4x12mm. provided.