Αναδιπλούμενη Βάση Πινακίδας ValterMoto Kawasaki Z800 ABS (13-16)

  • Ευρετήριο Κατασκευαστών Valter Moto
  • Κωδικός Προϊόντος: PRTAK13
  • Διαθεσιμότητα: Άμεση Παραλαβή / Παράδοση σε 1-3 Ημέρες

  • 85,00€



Remove the original license plate support, seats, the plastics of the rear tail and disconnect the wiring lights arrows and license plate lights.

 Place the VMC license plate in the rear frame with 2 screws m6x20mm. and tighten nuts to the original

 Place inside, 2 spacer h.14 mm supplied in the rear holes

 Insert 2 screws M6x30mm. in the rear holes of the VMC license plate. Tighten with 4 flanged nuts M6 supplied plate inside

 the license plate holder to the appropriate VMC plate (Pic.5) (screw M4x10mm.) and nuts enclosed

the lights supports modulating the height (screws M4x12mm) enclosed the reflector in the 2 holes in the center of the end license plate support (screws M4x12mm) enclosed
the VMC sticker above the mounting holes VMC license plate light

 Adjust the tilt using the screw M4x10mm enclosed.